Other

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension MTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. Intended for bikes with an 40mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.

Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Center mount version is compatible with almost any adult bicycle - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.

Replacement part

Durable: - High quality grade materials that don't yellow or crack over time - Self-healing pellicle making small scratches disappear - Strong, durable and very flexible materials to protect your bike from accidents, rock impact and tailgate pad rub Installation: - Easy to install and comes with a professional grade squeegee for a seamless installation - Ideal for DIY and full custom project - Easy to remove and leave no residue and safe on bike paint - Includes one premium quality 3M squeegee Compatibility: - Ideal for a more adjust fit on all kinds of bike: Trail, All-Mountain, Enduro, DH bikes, E-bike, CX bike or Gravel bike - Available Different lengths and Widths: 4in x 120in, 4in x 600in, 2.5in x 100in, 2.5in x 600in - Available in transparent gloss or mat for a flawless match to your bike finish

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Chainstay Protection Stay Skinz, Clear is specifically designed to discreetly provide bomb-proof protection for your seat and chain stays against impact and wear, commonly picked up on the trails and in transit.

Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA

Small PVC top tube protector. Helps protect your top tube if your drop bars spin into your frame in a fall. Fits 1-1/8" top tubes. Note: To ease installation soften the PVC by heating with a hair dryer or place it in very hot water for a few minutes. - Modern, minimalist top tube protector - Easy on-and-off installation

A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

- Stable 2-Stay mount - Made of alloy - Button type tool-free adjust - Fits wheels from 20-inches to 700C

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

Nylon cable ties - 8 inches long

- Alloy construction - Push button adjustment - Fully adjustable length - -Includes: top plate and 2-bolts (1-hex, 1-Allen)

- Highly reflective sticker sheets that contain a variety of different shapes and sizes of stickers - Perfect for frames, helmets, pads, or anywhere you want to add a bit more visibility

- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.

Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose

Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Fork Adapter for Suntour/RockShox Straight allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Frame Protection Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.