Tools/Maintenance

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Shop quality L-shaped, high torque industrial steel Torx compatible wrenches. Featuring chamfered tips, tight tolerances and a handy portable tool holder for easy access. Includes: T9, T10, T15, T20, T25, T27, T30 and T40.

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube

Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage

- Specialty high performance assembly grease that excels in a multitude of heavy duty and light duty applications - Delivers unmatched thermal stability and extreme pressure performance - Oil-soluble formulation provides exceptional protection against corrosion, water washout and wear.

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

- Ultra-Clean, waterproof formula chain lube designed for use in dry conditions - Surface active chemistry promotes smooth shifting under load, quiets chain noise and significantly improves life of drivetrain - Fast penetration and setup promotes a clean, trouble-free operating environment in dry, dusty conditions

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

- “New Bike in a Can” - Restore that factory shine - SC1 high gloss coating is specifically formulated to protect and beautify multiple surfaces including plastic, vinyl, rubber and carbon fiber - Water-resistant formulation is safe for use on gloss or matte finishes and makes the clean-up process easier by forming a durable coating that repels mud, dirt and debris

Professional strength cleaner specifically designed to clean suspension internally and externally. The unique and proprietary formulation combines industrial-strength cleaners with a powerful spray to ensure maximum cleanliness while leaving a dry and residue-free surface. Suspension Clean is strong enough to eliminate tough-to-clean grime and debris, but safe enough for incidental contact with Nitrile (buna-n), Viton, and most seal materials. For use on internal and external suspension components. Safe for incidental contact with most seal materials, but not suitable for use on silicone-based rubber. Never soak rubber materials. Avoid spraying on painted surfaces. May be harmful to some plastics. Features: - Formulated specifically for the industry professional. - Industrial strength cleaners remove tough-to-clean grime and debris. - Dries completely, leaving no film, residue, or moisture droplets. - Safe for incidental contact with most seal materials. - No harsh chemical smell.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - Consumer level bleed kit

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

Clip it on to your jeans, hang your keys, true your wheels, DON'T go rock climbing with it! Tech Specs - Material: Made from 7075-T6 aluminum - Fits: 3.45mm (0.136") spokes

- Dramatically improves brake response on bikes set up with rim brakes - Removes buildup on rim sidewall without damaging the rim surface

Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

5 Weight Damper Fluid For rebuild and repair of Fox suspension.

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette

- Clamp height adjusts from 41.75"- 56.75" (106 to 144 cm) to allow you to work at a comfortable level - Clamp head rotates 360° - The articulating jaw on the clamp provides a large clamp opening, allowing the bike to be easily inserted and removed by flipping the cam lever. - Clamp head is micro-adjustable to accommodate various tube sizes. - No tools required for quick setup and storage - Lightweight aluminum construction - Product Weight: 13.6 lbs (6.18 kg) - Max load capacity: 77 lbs (35 kg)

The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

The Switch Tool has evolved. We've all heard "if it ain't broke, don't fix it", but what if riders just want to fix more things? Enter the Big Switch, the larger sibling to the hit Switch tool. This new, compact, and super functional tool kit includes essentials you’ll find on the Switch including T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm allen bits, and a flathead screwdriver. The Big Switch also features an 8mm hex tool, and a chain breaker. The chain breaker handle includes size 0, 1, and 2 spoke wrenches, a disc pad spreader and a Presta valve core tool. Individual T or L handle tools let you access tight places and give you more leverage on bolts and screws. Go ahead, fix everything. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and a flathead. - Pocket sized nylon carrying pouch includes a stash for your I.D., credit card, and cash. - 134g

Your race mechanic on the go. Just because it's scaled down from a full-size ratchet doesn't mean it skimps on performance. The Big Switch Ratchet Tool takes the same simple necessities from the popular Switch and Big Switch and adds a convenient, ratcheting handle for even quicker, hassle-free adjustments. Extra-long 2.5 through 8mm Allen bits take care of business, along with T25 and T30 Torx, the renowned Wayside chain breaker, 0, 1, and 2 spoke wrenches, a disc-pad spreader, flathead, and a Presta valve core tool. You're covered. Fully covered. - Includes: T25, T30 Torx bits, extra-long 2.5, 3, 4, 5, 6, 8mm Allen bits, flathead screwdriver, wayside chain breaker, size 0,1, 2 spoke wrenches, disc pad spreader, Presta valve core tool

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

This opener grips the bottle cap like a wolf on prey and pops it right off every time! We even added a slot for truing your brake rotors and a large hole for a keychain or carabiner. This is not just some generic opener we selected from a catalog – this is a precision engineered tool that you will want to have with you all the time. Weight is a mere 32g so you can carry it with you wherever you go (even on the bike). - Precision shaping for the best bottle opening experience - Grips the bottle cap like a wolf on prey and pops it right off every time - Features slot for truing brake rotors and a large hole for a keychain or carabiner - Made in the USA from 7075 T6 aluminum - 32g

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30

Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts

Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel

Resolve Dropper Post Rebuild Kit includes refill fluid, graduated cylinder, and 10 travel adjustment spacers.

The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion. - Top flap that can be shut in a car door for a mobile workshop - Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground - Pocket layout is ideal for all the tools you need to build a bike - Aluminum eyelets for hanging up in your home or work shop - Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies

Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling-specific applications. It reduces friction on moving components while protecting them from contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs, headsets, general bicycle assembly, and more. - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to 180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, aluminum alloy, titanium, and carbon fiber. Applications: - hub bearings - free hubs - pedals - headsets - bottom brackets - suspension pivots - general assembly

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

Clean your chain in under 20-seconds with White Lightning's The Trigger. Simply close the lid of The Trigger over your chain, spray, and backpedal your chain for about three revolutions. The Trigger comes with one 12-ounce can of Clean Streak so you'll have everything you need for a clean, quiet ride.

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)