BMX

The M2 lever works with a single cable or Odyssey's dual cable system. - Includes M2 dual cable, double cable coupler and single cable coupler - Replaceable hardware to eliminate stripping

The Mainlines are our trail tires but they also make durable street tires. Available with wire beaded mid-weight, high pressure casings. The 2.10" (2.2" inflated) has a micro knurled surface on a directional tread designed to go on the rear. It also features a center tread with a V-notched edge for accelerating and a flat edge for braking. The 2.40" size is designed specifically as a front tire. Additional angular raised center tread sections keep the larger, front specific Mainline on the blue groove in turns! Available in 20" and 22" sizes. 20 x 2.1 Inflated Width: 2.20? (56mm) Inflated Diameter: 20.5? (521mm) Max Pressure: 110 psi Weight: 23 oz 20 x 2.40 Inflated Width: 2.4? (60.7mm) Inflated Diameter: 20.94? (532mm) Max Pressure: 110 psi Weight: 26 oz

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.

The Speedball is our street tire. Available in a wire beaded casing with extra pinch flat protection for street riders that prefer to run lower pressure. The Speedball features a multi edged S&M shoulder tread design that looks cool and holds the ground. The 20" Speedball has a smooth unbroken center strip for less rolling resistance, while the 22", 26" and 29" versions have a broken center tread making them great dirt/street/park tires as well. The 20" x 2.10" and 22" x 2.25" are light and fast and work well in the front or rear. Big enough for street riding but small enough to stay out of the way on grinds, spines, or frames and forks with minimal clearance. The larger 2.40" sizes work equally well on the front and rear.

ORIGINAL PITCHFORK (1991-1996) Prior to the Pitchfork, the best forks in BMX were made for racing. Given the high-stakes street and dirt riding going on by 1991, risking life and limb on paper-thin dropouts and skinny legs seemed silly.  The Original Pitchfork was made featured double-thick (1/8" welded together) drop-outs and slightly more rake for peg clearance. LEGS: 1.125"    DROPOUTS: DOUBLE THICK   STEERER TUBE" 2-PC WELDED, THREADED 1"       COMPRESSION: DESIGNED FOR SHAFTED STEM   AXLE TO CROWN HEIGHT: 12.2"   REQUIRES FORK RACE  OFFSET: 1.3"   WEIGHT: 2.3 LB.    

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

The ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single cap and less external machining than its predecessor. Internal machining to keep the weight down and two engraved Sharpie Shield logos round out the new, taller version of this popular dirt and street stem. Rise: 34mm (upright) 0mm (inverted) Reach: 40mm, 49mm, 52mm, 55mm Weight: (40mm) 11.7 oz (49mm) 12.9 oz (52mm) 13.4 oz (55mm) 13.8 oz

The latest incarnation of the Redneck has a shorter reach, slightly less drop and a simplified, clean look. A more refined “Redneck” if you will. REACH: 50 mm RISE: 7mm Upright / 24.75mm Inverted MATERIAL: 6061-T6 Aluminum WEIGHT: 11 oz

Machined body and 2-pc cap for reduced weight Designed to be lightweight without compromising strength Grade 8 Allen bolt hardware Made in USA Reach: 49mm, 53mm, 55mm, 57mm Rise: 23.5mm/ 8.1mm Inverted Weight: 10.2oz, 10.5oz, 10.9oz

22MM BB SPACER KIT ONE 10MM ONE 5.5MM AND FOUR 1.5MM SPACERS

Details LEGS Double Butted, Tapered, 4130 CrMo DROPOUTS Laser Cut 3/8" Slot STEERER TUBE Integrated Race,1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert STEERER TUBE LENGTH 166mm COMPRESSION M24 X 1.5 Thread - 6mm Allen Slot AXLE TO CROWN HEIGHT 18"-290mm, 20"-315.5mm, 22"-336.5mm, 24"-366mm   OFFSET 33mm WEIGHT 1.99 lb (.90 kg) HEAT TREAT 4Q Baked Post-Weld

SINGLE SPINDLE BOLT FOR 24MM BLUNT CRANKS ACCEPTS 8MM OR 6MM ALLEN WRENCH

CNC machined fork top cap. M24 X 1.5mm anodized red. Uses a 6mm Allen key to tighten (.6 oz). M24 X 1.5mm 7075 T-6 ALUMINUM ANODIZED RED

No frills, great feeling, shield Logo embossed, classic colors only

The legendary BF stem is back! At just over 28MM tall it’s in the middle of our Aitken and High-Top stems. With two lengths to choose from and a classic look that doesn’t sacrifice strength with any unnecessary machining. Made in USA. SPECS > Reach 48mm, 51mm Rise 28.66mm (upright), 2.84mm (inverted) Material 6061-T6 Aluminum Weight 9.9 oz (280 g), 11.1 oz (315 g)

The ENDURO V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single cap and less external machining than its predecessor. Internal machining to keep the weight down and two engraved Sharpie Shield logos round out the new, taller version of this popular dirt and street stem. Rise: 34mm (upright) 0mm (inverted) Reach: 40mm, 49mm, 52mm, 55mm Weight: (40mm) 11.7 oz (49mm) 12.9 oz (52mm) 13.4 oz (55mm) 13.8 oz

LEGS Double Butted, 4130 CrMo DROPOUTS Laser Cut 14mm Slot STEERER TUBE 1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert REQUIRES PRESS ON CROWN RACE STEERER TUBE LENGTH 160mm COMPRESSION M10 X 1.25 Thread - 6mm Allen Slot AXLE TO CROWN HEIGHT 315.5mm OFFSET 33mm WEIGHT 2.32 lb (1.05 kg) HEAT TREAT 4Q Baked Post-Weld

LEGS Double Butted, 4130 CrMo DROPOUTS Laser Cut 14mm Slot STEERER TUBE 1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert REQUIRES PRESS ON CROWN RACE STEERER TUBE LENGTH 160mm COMPRESSION M10 X 1.25 Thread - 6mm Allen Slot AXLE TO CROWN HEIGHT 315.5mm OFFSET 33mm WEIGHT 2.34 lb (1.06 kg) HEAT TREAT 4Q Baked Post-Weld

Details LEGS Double Butted,4130 CrMo DROPOUTS Laser Cut 3/8" Slot STEERER TUBE 1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert REQUIRES PRESS ON CROWN RACE STEERER TUBE LENGTH 160mm COMPRESSION M10 X 1.25 Thread - 6mm Allen Slot AXLE TO CROWN HEIGHT 18"-290mm, 20"-315.5mm, 22"-336.5mm, 24"-366mm,  26"-425mm   OFFSET 33mm WEIGHT 1.99 lb (.90 kg) HEAT TREAT 4Q Baked Post-Weld

Clint Reynolds and Co. wanted to tweak our classic Challenger stem to suit their brand of riding. The result is the Turtleneck: a 6061 T-6 aluminum CNC machined stem that’s a hair longer and narrower, with an internal cutout that lightens it up. REACH: 52 mm RISE: 24.5mm / 7mm Inverted MATERIAL: 6061-T6 Aluminum WEIGHT: 12.6 oz

Machined body and 2-pc cap for reduced weight Designed to be lightweight without compromising strength Grade 8 Allen bolt hardware Made in USA Reach: 49mm, 53mm, 55mm, 57mm Rise: 23.5mm/ 8.1mm Inverted Weight: 10.2oz, 10.5oz, 10.9oz

Featuring slightly thicker ribs than most grips to cushion savage drops.  -163mm length  -Extra soft and tacky rubber -No Flange  -Black Bar Plugs included   SPECS> Length 163mm Diameter 31mm Durometer Soft

LEGS Double Butted, Tapered, 4130 CrMo DROPOUTS Laser Cut 3/8" Slot STEERER TUBE 1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert INTEGRATED CROWN RACE  STEERER TUBE LENGTH 173mm COMPRESSION M24 X 1.5 Thread - 6mm Allen Slot AXLE TO CROWN HEIGHT 320mm OFFSET 26mm WEIGHT 1.99 lb (.90 kg) HEAT TREAT 4Q Baked Post-Weld

BLACK RIM STRIP WITH REPEATING SHIELD PRINT 20" X 25MM

CRAIG’S EXTRA-LONG FLANGE-LESS SIGNATURE GRIP BOASTS TWO DISTINCT PATTERNS, HALF CUSHY MICRO-RIBBED SHIELD AND HALF STURDY TRIANGLE PATTERN, SO YOU CAN RUN ‘EM YOUR WAY. MADE IN THE USA! Diameter: 31mm Length: 163mm Compound: Soft Bar Ends: Nylon Plug Style w/Sharpie Shield logo

A grippy, durable tire. Inflated Width: 2.1” Inflated Diameter: 12” Max Inflation: 60 PSI Weight: .81 lb (367 g)

A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. - Fully welded joint construction - Directional spoke hole drilling

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)