BMX

The Gyro G3 upper top plate is designed for use with the G3 detangler.

PINCH BOLT (1X) FOR 8 SPLINE 19MM CRANK ARMS WITH WASHER

BLACK RIM STRIP WITH REPEATING SHIELD PRINT 20" X 25MM

22MM BB SPACER KIT ONE 10MM ONE 5.5MM AND FOUR 1.5MM SPACERS

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

- Sold in pairs - Allen wrench included

Sweet grip donuts like your Rad Uncle used to have on his bike back in the 'day

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

CRAIG’S EXTRA-LONG FLANGE-LESS SIGNATURE GRIP BOASTS TWO DISTINCT PATTERNS, HALF CUSHY MICRO-RIBBED SHIELD AND HALF STURDY TRIANGLE PATTERN, SO YOU CAN RUN ‘EM YOUR WAY. MADE IN THE USA! Diameter: 31mm Length: 163mm Compound: Soft Bar Ends: Nylon Plug Style w/Sharpie Shield logo

The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only

The Kink fork cap bolt aims to make things just a little more convenient and is keyed for both a 6mm allen key and 3/8" ratchet drive. The cap itself is CNC machined from high-grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a majority of other forks, as well. TECH SPECS - Thread Type: M24×P1.5 - Tool Type: 3/8" Ratchet and 6mm allen hex - Material: 7075-T6 Aluminum - Weight: 0.8oz

A replacement dual cable stop for bikes with a dual cable gyro setup. Fits most popular frames with removable brake mounts and cable stop. Product Specifications - Type: Single Screw - Includes: Cable Stop and Screw - Weight: 0.5oz

Replacement nylon sleeve for the Mission Targa peg. Sold individually. Product Specifications - Compatibility: Fits Mission Targa Peg Only - Material: Nylon Composite - Weight: 2oz

Details CNC machined fork top cap. M10 X 1.25mm anodized black. Uses a 6mm Allen key to tighten (.4 oz). M10 X 1.25mm 7075 T-6 ALUMINUM ANODIZED BLACK

SINGLE SPINDLE BOLT FOR 3PC 24MM INDENT CRANKS

SINGLE SPINDLE BOLT FOR 24MM BLUNT CRANKS ACCEPTS 8MM OR 6MM ALLEN WRENCH

Replacement nylon sleeve for the Cinema C4 peg. - Material: Nylon Composite - Length: 4.33" (110mm) - Diameter: 40mm - Core sold separately

Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench. - Thread type: M24×P1.5 - Thread Length: 15mm - Weight: 0.7oz

Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs. Product Specifications - Type: Single Screw - Includes: 2 Tabs and 2 Screws - Weight: 0.5oz

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.

From trail riders to street riders and racers, this grip is loved by all for its immediately broken in feel and tackiness.  Proprietary extra soft and tacky Thermal Plastic Rubber Medium diameter Matching Bar Plugs included American Made by ODI SPECS >  Length 140mm Diameter 31mm Durometer Soft 

CNC machined fork top cap. M24 X 1.5mm anodized gold. Uses a 6mm Allen key to tighten (.6 oz). M24 X 1.5mm 7075 T-6 ALUMINUM ANODIZED GOLD