Parts & Accessories
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Endura created the WP Gaiter Overshoes so you can train and enjoy the outdoors even in wet weather. These booties are completely waterproof with reflective accents. Their durable 3-layer nylon sole and elasticized stirrups fit a variety of footwear and cleats. With these shoe covers, you'll be ready when the storms roll through, regardless of which shoes you choose to wear.
BOA® L6 REPAIR KIT 1 DIAL COMPATIBLE WITH SH-RC701/XC701/ME501/MW701
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
The REFLECT360 overshoes offers exceptional waterproofing and all over reflectivity for commuters and night riders. Utilizing our REFLECT360 technology, the material reflects vehicle headlights so they light up to be bright white to help your position on the road be more easily identifiable. They have a waterproof lock-zipper, reinforced toe and heel, calf hook and loop adjustment and an open sole for your cleats. All in all, everything you'd want in a top quality waterproof shoe cover. - 100% REFLECT360 reflective material - Protective mesh covering the reflective paneling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, calf hook & loop adjustor and open sole - Reinforced toe and heel - Designed to be worn with cycling shoes - not trainers or other shoes
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane
Born out of necessity during wet and muddy Midwest gravel races, our Gravel Gaiter keeps mud, sand and gravel out of your shoes. We took inspiration from the scree gaiters used by trail runners to develop a cycling-specific version that provides maximum breathability and durability so you can ride through the worst conditions. A locking zipper keeps the Gravel Gaiter securely in place and the Hypalon midfoot strap won't get in the way during treacherous hike-a-bike sections.
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
This shoe cover is as committed as you are to riding through the wettest weather, thanks to three-layer waterproof/breathable fabric that blocks wind and stops rain in its tracks. The WRX Shoe cover works with both road and mountain bike shoes and can be used with standard footwear as well. (We suggest sizing up for flat pedal and street shoes). A two-stage hook and loop closure makes it easy to pull these on and keeps the elements at bay. BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Made with recycled materials - Compatible with road, mountain, and standard shoes - We suggest sizing up for mountain bike or street shoes - Three-layer waterproof breathable fabric blocks wind and water - Two-stage hook and loop closures for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 87% polyester, 13% nylon
Like their namesakes, “Crocs” have been around forever, they’re tough as nails and stand the test of time. The instep strap is now triple-bartacked BioThane webbing, and an additional tab holds down the front opening. The fitted design and durable, waterproof fabrics are the standard for which all gaiters are judged. - Gore-Tex 3L - 100% nylon - 70D plain weave leg panel - Cordura 2L - 100% nylon - 1000D woven foot panel - Windproof Waterproof, Breathable, and Abrasion-Resistant - Laminated Construction - Durable BioThane Instep Strap - Abrasion-Resistant Cordura at Inner Leg and Boot - Abrasion-Resistant Lower Boot Lined with Packcloth - Larger Circumference Accommodates Plastic Mountaineering Boots - Double Stitched Front Closure - Reinforced Boot Lace Hooks - Hook/Loop Front Closure - Buckle Top Closure
- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo
- Wind-resistant fabric - Microfleece lining - Water-resistant - Reflective logo
- Wind-resistant fabric - Microfleece lining - Reflective logo
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
- Replacement ratchet tongue for selected styles of shoes - 2 pieces - 93mm
Want one shoe piece to cover the entire road or mountain biking season? The Neo Protect 3 Shoe Cover is the one for you! Extremely durable, warm, and has easy adjustments with very wide side hook-and-loop fasteners with large locking zippers for easy use, this shoe cover is the only one you'll need all season long. It provides 360 degrees of reflectivity for added visibility in low light conditions, a reinforced Kevlar track under the foot with Hypalon rubber for long term walkability, and provides all-season wind and water resistance. - Cuff: Bias - Under Sole: 2 openings for road and SPD cleats - Side opening: Seam-sealed hook and loop fastener for easy slip-on - Visibility Features: Reflective - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
- Replacement ratchet set for selected styles of Garneau's shoes - 2 pieces Technical Details: 1487159 : Women's CFS-300 shoes# 1487199 : Men's CFS-300 shoes 1487153 : Women's REVO XR3 shoes 1487152 : Men's REVO XR3 shoes 1487170 : Men's CARBON HRS-2 shoes 1487100 : Men's FUTURA XR shoes 1487160 : Women's FUTURA XR shoes 1487108 : T-FLEX 300 shoes 1487189 : MONTANA XT3 shoes
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
Ideal for the cold season: Extremely lightweight GORE WINDSTOPPER overshoes keep your feet wonderfully warm. They fit snugly on shoes for a close fit. A zipper on the back makes for easy off and on. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Reflective logo and piping - Zipper closure
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.
58% Merino Wool, 35% Nylon, 7% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity. Available in charcoal grey.
Warm neoprene bootie that protects your feet in very cold and wet conditions. All seams are covered with waterproof tape on the inside for optimal weather protection. The bootie also features Velcro adjuster at top, reinforcements at bottom and water-repellent zipper.
Page 1 of 2 Next page