Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Hubs

$449.00
Rear hub 14mm nickel chromoly axle with 6mm broach 6016 hub today with 2 sealed bearings 1pc chromoly driver with 3 sealed bearings 4 pawl driver with individual leaf springs for precise engagement Proprietary plastic non-drive side hub guard 24t ratchet ring, 15 degrees of engagement Flange diameter: 54mm Pitch center diameter: 45mm Center to flange: 25.2mm Holes: 36 Weight: 550g w/guard Colors: Black, Red, Polished Front hub 14mm chromoly center axle with 3/8” bolts 6016 alloy hub body / 7075 collars Longer 35L 3/8” bolts to adapt to any peg configuration 2 sealed bearings 2 Proprietary plastic hub guards Flange diameter: 47mm Pitch center diameter: 38mm Center to flange: 31.8mm Holes: 36 Weight: 320g w/guard Colors: Black, Red, Polished Rims The design of the Shadow Truss rim is focused around the same principles as modern bridge design in architecture. Considering the effects of compression as well as tension, the Shadow Truss rim is designed as a very rigid structure and one that transfers the load from a single point to a considerably wider area. These details create a stronger and more impact resistant rim to keep you rolling. Double walled, 38mm wide rim Centerline spoke drilling Increased spoke area to limit spoke pull through and increase structural integrity internal chambers with bridge inspired design Heat treated 6061-T6 alloy with welded seam 36 Hole Weight: 17.75 oz. ERD: 389.6mm
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm
$49.99
The Box Three Expert Front Hub is a lightweight version of the Pro-sized counterpart. It includes precision sealed bearings but uses aluminum axles, a smaller hub-shell, and lightweight hardware; for the smaller riders who like to go fast! Hub features a quick-release style front axle. FEATURES - Lightweight Construction. - Bearings Built To Avoid Contamination. - Quick Release Style Through Axle To Secure Against Movement. COMPATIBILITY - Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork - Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork - Box One 24x1-1/8" 28-Hole Front Rim Black - Box One 20X 1-1/8" 28-Hole Rim Rear Black
$149.99
The Box One Stealth Expert Front Hub is designed to be light FOR lightweight riders, and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. This makes the Stealth Expert Front Hub ideal for any Mini, Junior, or Expert wheel build, but may also accommodate a lightweight rider looking to move up to a pro-sized bike. FEATURES - Micro-Adjust Pre-Load Collar - Lightweight Design IMPORTANT NOTES Warning: The BMX spec is optimized for even lower drag with unsealed bearing. They are designed to be ridden in dry conditions. If ridden in wet conditions you will need to service the internals after each event or riding session. COMPATIBILITY - Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork Black - Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork - Box One 24x1-1/8" 28-Hole Front Rim Black - Box One 20X 1-1/8" 28-Hole Rim Rear Black
$249.99
The Box Three Pro Hubs are our most affordable hubs, but don't be fooled they are still packed full of features! Our Box Three Pro Disc Rear hub has a super-fast 120 Tooth Engagement system, precision sealed bearings, a steel 10mm axle, AND a 6-Bolt disc brake rotor mount. This creates a hub that accelerates and decelerates insanely fast at a wallet-friendly price! FEATURES - Faster engagement than most hubs in the market. - Bearings are built to avoid contamination. - Female axle to secure against movement. - Disc compatible for improved braking. IMPORTANT NOTES Hub includes Steel Bolts, lockings, Spacers, and 16t Cog. COMPATIBILITY - Box One Cassette Spacer Kit - Box One XL Pro Lite Carbon 1-1/8" Alloy Steerer 20” X 10mm Fork - Box One XL Pro Lite Carbon 1-1/8" Alloy Steerer 20” X 10mm Fork - Box One 24x1.75" 36-Hole Front Rim Black - Box One 20x1.75" 36-Hole Front Rim Black
$349.99
The Box One Stealth Expert Rear Hub is designed to be lightweight for smaller riders and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. Featuring our Stealth Technology adds instant engagement and silent low-drag coasting making it ideal for Mini, Junior, or Expert wheel build. Still, it may also accommodate a lightweight rider looking to move up to a pro-sized bike. FEATURES - Stealth Technology™ - Instant Power Delivery - Low Drag Coasting - Infinite Points of Engagement - Silent Coasting - Micro-Adjust Pre-Load Collar
$26.79
- Heat-treated axle for improved strength - Angled Flanges for lateral stability in wheel building - Rear hubs include a 4-pawl cassette body with 9-tooth driver - Use: Front - Drilling: 36H - Material: Alloy - Brake Type: Rim - OLD: 100mm
$49.39
- Includes 9T Micro drive cog - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Drilling: 36H - Axle: Nutted 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Loose
$51.99
- Aluminum hubs - Sealed bearing - Nutted - Use: Front - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm - Bearing Type: Sealed
$52.99
- Aluminum hubs - Sealed bearing - Nutted - Use: Front - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm - Bearing Type: Sealed - Hole Count: 36
$52.99
- Aluminum hubs - Sealed bearing - Nutted - Use: Rear - Gears: Flip-flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed
$52.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Front - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm
$52.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Rear - Gears: Flip/flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm
$64.79
- Single speed BMX hubs with a 14mm axle slotted to 3/8-inch - Sealed bearings - Use: Rear - Gears: Singlespeed Freewheel - Drilling: 36H - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed
$93.39
- Heat-treated axle for improved strength - Angled flanges for lateral stability in wheel building - Rear hubs include a 4-pawl cassette body with 9-tooth driver - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Axle: 14mm, 3/8-inch - Material: Alloy - Drilling: 36
$93.39
- Heat-treated axle for improved strength - Angled Flanges for lateral stability in wheel building - Rear hubs include a 4-Pawl Cassette body with 9-tooth driver - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Spacing / Axle: 14mm - Material: Alloy - Drilling: 48
$116.59
- Aluminum hubs - Sealed bearing - Nutted - Use: Rear 110mm - Driver: Singlespeed cassette w/12T cog and lockring - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed - Drilling: 32
$116.59
- Aluminum hubs - Sealed bearing - Nutted - Use: Rear 110mm - Driver: Singlespeed cassette w/12T cog and lockring - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed - Drilling: 36
$168.39
- Singlespeed freecoaster hubs with 9-tooth driver - Sealed bearings - Use: Rear - Gears: Singlespeed w/ 9-tooth driver - Drilling: 36 - Axle: 14mm - OLD: 110mm - Bearing Type: Sealed
$359.00 - $504.00 $359.00 - $504.00 Up to 14% Off
Everything about Chris King’s ISO rear hub means business. From the extra-large hub shell and wide-radius spoke flange, to their own in-house ball bearings and lightning fast engagement. The ISO rear hub might just be the last hub you ever own. The 142 x 12mm axle adds rear end stiffness and efficiency, and these hubs are compatible with 135mm-wide, 10mm, and 12mm replacement axles (sold separately).
$84.99
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz
$189.99
Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)
$199.99
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - 9T Freecoaster - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/Guards Installed)
$10.00 - $33.62
- DM-5961 converts DMR Revolver 20x110mm thru-axle front hub to standard quick release skewer for 9mm dropouts (skewer not included) - DM-5963 converts DMR Revolver 20x110mm thru-axle front hub to 15x100mm thru-axle DM-5965 converts a DMR Revolver 12x135
$3.40
Parts for repair and maintenance of DT Swiss hubs.
$61.30 - $99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Page 1 of 6 Next page