24-Inch & Smaller

Hand-built in Southern California, Box Three Wheels are made with Box One front and rear rims and 36-hole, Box Three Pro Hubs laced 3-cross front and rear with 14-gauge stainless steel spokes and brass nipples. Each wheelset is built with Wheelsmith Spoke Prep and inspected using a DT Swiss tension meter for quality control. Includes both front and rear wheels.

Rear hub 14mm nickel chromoly axle with 6mm broach 6016 hub today with 2 sealed bearings 1pc chromoly driver with 3 sealed bearings 4 pawl driver with individual leaf springs for precise engagement Proprietary plastic non-drive side hub guard 24t ratchet ring, 15 degrees of engagement Flange diameter: 54mm Pitch center diameter: 45mm Center to flange: 25.2mm Holes: 36 Weight: 550g w/guard Colors: Black, Red, Polished Front hub 14mm chromoly center axle with 3/8” bolts 6016 alloy hub body / 7075 collars Longer 35L 3/8” bolts to adapt to any peg configuration 2 sealed bearings 2 Proprietary plastic hub guards Flange diameter: 47mm Pitch center diameter: 38mm Center to flange: 31.8mm Holes: 36 Weight: 320g w/guard Colors: Black, Red, Polished Rims The design of the Shadow Truss rim is focused around the same principles as modern bridge design in architecture. Considering the effects of compression as well as tension, the Shadow Truss rim is designed as a very rigid structure and one that transfers the load from a single point to a considerably wider area. These details create a stronger and more impact resistant rim to keep you rolling. Double walled, 38mm wide rim Centerline spoke drilling Increased spoke area to limit spoke pull through and increase structural integrity internal chambers with bridge inspired design Heat treated 6061-T6 alloy with welded seam 36 Hole Weight: 17.75 oz. ERD: 389.6mm

The Reynolds FX2 Freecoaster wheel features the Garrett Reynolds signature rim laced to the updated Cinema FX2 freecoaster hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards and keeps Garrett rolling smooth regardless of what he throws at it.

The 888 Cassette wheel features the super-strong Cinema 888 rim, laced up to the updated Cinema VX3 cassette hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples, providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards, making it ready to go out of the box!

The 888 Freecoaster wheel features the super-strong Cinema 888 rim, laced up to the updated Cinema FX2 freecoaster hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples, providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards, making it ready to go out of the box!

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 24-inch

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 20-inch

The 888 FX front wheel features the beastly Cinema 888 rim, laced up to the Cinema FX front hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and Cinema CF nylon hub guards, making it ready to go out of the box!

The Mission Deploy freecoaster rear wheel features the Mission Deploy freecoaster hub, hand laced to our strongest Mission Mylar rim. All sealed bearings, double wall rim, 36 stainless steel spokes, trued to perfection. - Hub: Sealed Deploy freecoaster hub - Rim: Mission Mylar double wall rim - Spokes: 36 14-gauge stainless steel spokes - Cassette compatibility: 9T Freecoaster - Weight: 48.0oz

The ZX 333 rear wheel is the most affordable wheel in our line. Featuring a double-wall pinned 333 rim laced to a fully sealed cassette with 14mm male axles and 9T driver. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX Cassette - Driver: 9 Tooth - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 3 lbs 1 oz

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Rear hub: Shimano FH-MT400-B Boost - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - Compatible with 10 speed MTB (11/12 speed with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

The Mission Engage rear cassette wheel is a fully sealed hub, 3-cross laced to the rugged Mission Mylar double wall rim. Heat-treated chromoly axle, 5 precision sealed bearings, and stainless-steel spokes make the Engage wheel a solid ride. - Hub: Mission Engage Cassette - Rim: Mission Mylar - Weight: 46.1oz

The ZX 333 front wheel is our most affordable wheel. Featuring our double-wall pin-joint 333 rim, laced 3x to a fully sealed hub with a female axle with 3/8" bolts. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 2 lbs 5 oz

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Formula DC-20 - QR 9x100mm (Quick Release binder included) - Anodized black with Laser Etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal Rear hubs options: Formula DC-22 (QR10x135mm) / DC-2241 (Boost QR 9x141mm) - Quick Release binder included - Anodized black with laser etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal - Compatible with 8-11 speed MTB (12 speed HG with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 10T chromoly driver with 3-pawl system. Its designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 10T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The Mission Radar front wheel features the Mission Radar front hub, hand laced to our strongest Mission Mylar rim. Sealed bearings, double wall rim, 36 stainless steel spokes, trued to perfection.

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

- Gusset's bestselling BMX, dirt jump and street use wheels - Black Dog 32mm 6061 alloy double wall rims with loose-ball alloy hubs, black spokes - Flip/flop freewheel threaded rear - Heat treated CrMo axle with room for pegs

- Taiwan 7x style 36 hole steel rim - Front steel hub uses a 3/8" flatted axle. Compatible with 5/16" forks - Steel wheels use C/N 14G UCP spokes w/ 5/8" brass nipples

The Rampage 22-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks. - Axle: 3/8-inch chromoly - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal - Drilling: 36H - PVC rim strip included

The Rampage 24-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks. - Axle: 3/8-inch chromoly - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal - Includes Stolen PVC rim strip - Drilling: 36H - Includes Stolen PVC rim strip

- RIM: Alex alloy - SPOKES: Steel

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz